Small Waste Incinerator Plant

Small Waste Incinerator Plant


A SWIP needs a Permit to Operate issued by a Local Authority (LA), rather than the UK Environment Agency (EA), following Schedule 13a of the Environmental Permitting Regulations (EPR) issued by DEFRA.  The emissions monitoring requirements are based on the Emission Limit Values (ELV) for specific process types, size and fuel variety with recognisable Quality Aassurance guidelines to be adhered. The Industrial Emissions Directive (IED) forms the basis of the requirements which are also used for much larger plant

SWIP CEMS

It is important to discuss the absolute requirements for CEMS with the Local Authority responsible for regulation of the site.  The IED allows for certain derogations, or relaxations, to be applied based on the pollution potential of the process. By consideration of plant operations, like fuel composition and abatement plant deployed to reduce emissions, some of the parameters normally requested for continuous measurement may be relaxed to periodic measurement to reduce the regulatory burden on both Operator and Inspector.

Some common combinations of CEMS parameters:

CO, NOx, TOC & Particulates 

CO, NOx, TOC, SO2, HCl & Particulates

CO, NOx, TOC, SO2, HCl, HF & Particulates

It is important to start this discussion as early as possible with the Regulator so that clarity of requirements is given in good time.  For small processes, the relative capital cost of CEMS, and subsequent Cost of Ownership, can seem disproportionate when compared to Medium and Large combustion processes.

By careful consideration of the Measurement, Operational and Regulatory goals of the process, it is possible to manage all stakeholders’ expectations and efficiently demonstrate on-going compliance.  

Contact us via the Product Details link below to discuss your application.

Suitable Products

SWIP CEMS
SWIP CEMS

Cabinet system consisting of pre-mounted system components – including multigas analyser, FID, sampling equipment and DAS. Fully certified to comply with IED

GCEM-E
GCEM-E

Self-contained NDIR multigas analyser with heated sample delivery system. Includes HCl and SO2 measurement, and suitable when certification requirements are flexible.

FGA
FGA

Self-contained compact CEMS system with integral sensors, sampling and conditioning system. Value solution when HCl, SO2 and HF are derogated.

Need To Discuss?

If you have a project or requirement which you would prefer to discuss then please call +44 (0) 1246 264945 or visit our contact page for further details